Engineer Builds an Aluminum Mini Tugboat Strong Enough to Tow Two Kayaks

Peter Sripol Aluminum Mini Tugboat
Peter Sripol recently finished a half-scale aluminum tugboat in his workshop, built entirely from sheet metal and powered by a pair of thrusters he picked up for fifty dollars. This remote-controlled version serves as a test run for a larger boat he eventually wants to ride, roughly twice as long so he can sit inside the cabin. He designed the shape in CAD software, then sent the files to a CNC laser cutter that sliced precise flat panels and internal bulkheads from two-millimeter and three-millimeter aluminum sheet.



To assemble those panels into a curved hull, you had to stoop down and bend the metal by hand before attaching each edge using a hand-held laser welder. The instrument worked well for long straight seams and flat surfaces, but the boat’s outer shell is mostly corners and tight angles, which the laser welder struggled with. The heat from the process caused the entire thing to bend and begin oil-canning on the cabin roof, and you’d have to use a filler to fill the tiny holes. Even after putting the structure together, Sripol had to go back and plug a few pinholes with marine epoxy to keep the hull waterproof when it struck the water.

Sale

Bambu Lab A1 mini 3D Printer + LED Lamp Kit, Ready-to-Use for Beginners | Beginner-Friendly Ecosystem...

Bambu Lab A1 mini 3D Printer + LED Lamp Kit, Ready-to-Use for Beginners | Beginner-Friendly Ecosystem…

  • A1 mini + LED Lamp Kit for Creative Light Projects: Bring your ideas to life with the included LED Lamp Kit. Simply print compatible lamp models and…
  • The Perfect 3D Printer for Beginners: A1 mini 3D Printer is designed to make 3D printing easy from day one with automatic calibration, simple setup…
  • Experience the Bambu Lab Ecosystem: Access MakerWorld’s huge library of ready-to-print models, manage prints through the Bambu Handy app, and enjoy…

Peter Sripol Aluminum Mini Tugboat
A large aluminum shell sits too high without additional weight, causing the propellers to spin in mid-air and lose grip. Sripol had to toss a large concrete cinder block and a couple barbell weights in the bottom to bring the waterline down to the proper level. The two thrusters, originally made for motorized paddleboards, bolt straight to the underside of the hull and run on a 24-volt battery pack through a basic controller. Differential thrust from a single joystick turns the boat, allowing it to spin in place when needed.

Peter Sripol Aluminum Mini Tugboat
Out on the lake, Sripol attached the tugboat to the bow of one kayak, which was then connected to another kayak carrying a cameraman. And the small boat towed them both along on autopilot at around 3 mph. This is exactly what you’d expect from a displacement hull designed to push or pull objects rather than sit on top of the water. Even though it looked a little ragged around the edges on the workbench, it was able to move actual loads once the ballast and thrusters were installed.

Peter Sripol Aluminum Mini Tugboat
Sripol has already uploaded the DXF cutting files to Thingiverse for anyone who wants to undertake a similar build, noting that the first version has a few problems that you will need to fix yourself. A full-size version is still on the drawing board at this point, but the little tugboat has demonstrated that you can create an all-aluminum hull with a laser welder and have it survive in the water while pulling a practical weight.

Engineer Builds an Aluminum Mini Tugboat Strong Enough to Tow Two Kayaks

#Engineer #Builds #Aluminum #Mini #Tugboat #Strong #Tow #Kayaks

Leave a Reply

Your email address will not be published. Required fields are marked *